Experimental study on the seismic behaviour of RC beams with standing and hanging walls

  • Koichi Kusunoki University of Tokyo, Tokyo, Japan
  • Chikashi Nishikura Mitsubishi Jisho Sekkei, Tokyo, Japan
  • Akira Tasai Yokohama National University, Yokohama, Japan

Abstract

Recently, earthquake damage to non-structural walls has become one of the important issues in Japan. Some buildings were demolished after the 2011 Tohoku Earthquake due to damage of non-structural walls without any significant damage in structural members. After that, several projects were launched to develop a new method to take into account the effect of non-structural walls (hanging, standing, and wing walls). In this paper, experimental test results for beam-column joints with non-structural walls are presented. The objectives of the tests were to investigate the equivalent length and hinge location of beams with hanging and standing walls. The results showed that the yield hinge located at the surface of the wing walls and beam-column joint should be modelled as rigid to estimate the deformation of the beams, regardless of the thickness and height of the wall. A tri-linear modelling method for beams with hanging and standing walls was also proposed, and its applicability was confirmed with the test results.

References

Building Center of Japan (2013). “The Building Standard Law of Japan”. BCJ, Tokyo.

Building Center of Japan (2013). “Article 78-2” in “The Building Standard Law of Japan”. BCJ, Tokyo.

The Architectural Institute of Japan (2012). “Damage to Reinforced Concrete Buildings” in “Preliminary Reconnaissance Report of the 2011 Tohoku-Chiho Taiheiyo-Oki Earthquake”. AIJ, Tokyo, 47pp.

Kabeyasawa T, Kim S, Sato M, Hyunseong H, Kabeyasawa T and Fukuyama H (2012). “Evaluation on deformability of reinforced concrete columns with wing walls”. Proceedings of the 15th World Conference on Earthquake Engineering (15WCEE), Lisbon, Portugal.

Tasai A, Sugimoto K, Kusunoki K and Sauod M (2016). “An experimental study on the seismic performance of RC beams with non-structural walls”. Journal of Structural Engineering, 62B: 203-212

The Architectural Institute of Japan (2011). “AIJ Standard for Structural Calculation of Reinforced Concrete Structures”. AIJ, Tokyo (in Japanese).

Tasai A, Watanabe H, Kusunoki K, Suzuki A, Fukuyama H and Tajiri S (2009). “An experimental study on performance of RC beams with spandrel walls: Part 2: Studies on deformation capacity and flexural strength of RC beams with spandrel walls”. Proceedings of Annual Meeting of the Architecture Institute of Japan, 23035 (in Japanese).

National Institute for Land and Infrastructure, and Building Research Institute (2011). “Commentary on Structural Regulations in the Building Standard Law of Japan”. Tokyo.

Blogg JD, Churchill WT and Shah HP (1995). “Prediction of Catastrophes in New Zealand”. Bulletin of the New Zealand Society for Earthquake Engineering, 28(3): 196-217.

Published
2017-12-31
How to Cite
Kusunoki, K., Nishikura, C., & Tasai, A. (2017). Experimental study on the seismic behaviour of RC beams with standing and hanging walls. Bulletin of the New Zealand Society for Earthquake Engineering, 50(4), 537-546. https://doi.org/10.5459/bnzsee.50.4.537-546
Section
Articles